The Shuttle XPC slim Barebone DL20N Series is the successor to Shuttle's DL10J. These fanless Slim PC barebones with an energy-efficient 10 nm Intel 'Jasper Lake' processor are suitable for building particularly slim PC systems with drives and operating system as well as client/server setups for pure network-based applications. The optional Shuttle accessory WWN03 allows for an LTE module to be installed for mobile internet access. The integrated graphics is based on Intel's powerful 11th gen. Intel UHD Graphics that supports hardware acceleration for 4K videos. Combined with an SSD or M.2 drive, these Slim-PCs works virtually noiseless.
Features
Intel Celeron N4505
1× HDMI 2.0b, 1× DisplayPort 1.4a, 1× VGA
Up to 16 GB of DDR4 memory
Two M.2 slots (1× M.2-2280, 1× M.2-2230)
Gigabit Ethernet, WLAN-ready
1× NVMe, 1× SATA 2, 5 inch, card reader
2× USB 3.2 Gen 2 (10 Gbit), 2× USB 3.2 Gen 1 (5 Gbit), 2× USB 2.0, 2× COM
Prepared for LTE reception
Remote power-on connection, always-on jumper
Wall/VESA mounting option
Optional DIN-Rail/19†mount
100% fanless
Energy-saving technology combined with an ingenious cooling system mean no fans are required. No operating noise at all, fewer moving parts and therefore lower maintenance costs too. <
How does this work?
Thanks to a simple physical principle, known as convection. Warm air rises while entraining colder air at the same time. This permanent flow passes through machines or travels along surfaces. This prevents a build-up of heat and ensures reliable cooling.
Maximum flexibility in the choice of monitor
Three different graphics outputs, both with digital and analogue signals, offer great flexibility in the choice of the display. This model features an HDMI 2.0, DisplayPort and VGA port.
USB transmission with 10 Gbit per second
External devices or data storage media with a USB interface benefit from bandwidths of 10 Gbit/s. Portable SSDs or hard drives which support the relevant standard can theoretically transmit up to 1.25 gigabyte per second.
Wired remote starting
This model features a remote power-on connection. Any two-pin cable can be used to connect dedicated buttons via pins on the back and they then allow the machine